AGA & RAYBURN 2017-08-08T14:26:28+00:00

AGA & RAYBURN

Staunch and Flow are Central London’s independent service engineers for Aga. We maintain and service all Aga gas cookers.

HOW WE CAN HELP YOU?

SPEAK TO A PLUMBER NOW

AGA & RAYBURN

Aga advise all customers to have their appliance serviced every year. Our staff have completed all necessary Aga and Rayburn courses and have the appropriate Range Cooker certification to work on these cookers.

A service costs £160 + VAT. We carry out the full approved Aga/Rayburn services which includes taking off the hot plate, checking that all the flues are clean and changing the thermocouple. Parts – including the thermocouple – are not included in the Aga service price.

If something has gone wrong with the cooker and we need to fix it, then we charge at our hourly rate of £85 + VAT/hour. Our Aga service engineers will explain all this when they visit.

Please note that in order to work on an Aga you must turn off your cooker 24 hours in advance in order for it to have cooled down enough to work on. Continue reading below for advice on how to do this.

www.aga-rayburn.co.uk

For your information, here are some other Aga parts prices that may be relevant to works that we may need to carry out:

Dome Ropes both lids                                Supply and fit £132 plus VAT

Dome Liners w/insulation both lids        Supply and fit £165 plus VAT

Roasting door Liner w/insulation            Supply and fit £160 plus VAT

Simmer oven door liner w/insulation     Supply and fit £116 plus VAT

Roasting/simmer oven door seals           Supply and fit £110 plus VAT

Aga Chrome Dome Restoration Pkg*      Supply and fit £398 plus VAT

*This comprises of:

2 x New chrome dome tops
2 x Superwool insulation pads
2 x Alloy lid liners
2 x Wire lid seals
1 x Tube of Everflex to stick in place
8 x Fixing screws to hold the domes in place

OTHER SERVICES

Turning your Aga off

Refer to the sketch below to identify the various controls.

aga1-1

If your Aga is only to be left for a few days, why turn it off? It doesn’t hurt to leave it on a lower thermostat position.

For longer periods the pilot only may be left on as follows:

Turn the black control tap ’4′ (located in the centre of the numbered ring) through 90 degrees, until the finger grip is at right angles, i.e across the gas pipe.

To turn it off completely: Carry out the above and then turn the main control cock ’1′ through 90 degrees, so that the line on the cock, is across the pipe.

This turns both pilot and main burner off.

Refer to the sketch below to identify the various controls.

aga2

If your Aga is only to be left for a few days, why turn it off? It doesn’t hurt to leave it on a lower thermostat position.

For longer periods the pilot only may be left on as follows:

Turning the thermostat knob ’4′ clockwise to the ’0′ position.

To turn it off completely:

1. Carry out the above and then press and release the button ’3′ marked with an ’0′ symbol.

2. Turn the main gas cock ’1′ through 90 degrees, until the line marked on the cock, is across the gas pipe.

This turns both pilot and main burner off.

Gas MK 3 Burner (SIT)

Refer to the sketch below to identify the various controls.

aga3

If your Aga is only to be left for a few days, why turn it off?

It doesn’t hurt to leave it on a lower thermostat position.

For longer periods the pilot only may be left on as follows:

Turning the control knob ’2′ clockwise to the ‘white band’ position.

To turn it off completely:

1. Turn the control knob clockwise to the ‘black dot’ position.

2. Turn the main gas cock ’1′ through 90 degrees, until the line marked on the cock, is across the gas pipe.

3. If your cooker has an electricity supply, this should be turned off as well.

This turns both pilot and main burner off.

Gas MK 3 Burner (Maxitrol)

Refer to the sketch below to identify the various controls.

aga4

If your Aga is only to be left for a few days, why turn it off? It doesn’t hurt to leave it on a lower thermostat position.

For longer periods the pilot only may be left on as follows:

Either switch off the electricity supply to the Aga (where provided) or turn knob ‘B’ to position ’1′

To turn it off completely:

1. Turn the control knob ‘A’ clockwise to the ‘OFF’ position.

2. Turn the main gas cock ’1′ through 90 degrees, until the line marked on the cock, is across the gas pipe.

3. If your cooker has an electricity supply, this should be turned off as well.

Refer to the sketch below to identify the various controls.

aga3

If your Aga is only to be left for a few days, why turn it off?

It doesn’t hurt to leave it on a lower thermostat position.

For longer periods the pilot only may be left on as follows:

Turning the control knob ’2′ clockwise to the ‘white band’ position.

To turn it off completely:

1. Turn the control knob clockwise to the ‘black dot’ position.

2. Turn the main gas cock ’1′ through 90 degrees, until the line marked on the cock, is across the gas pipe.

3. If your cooker has an electricity supply, this should be turned off as well.

This turns both pilot and main burner off.

Refer to the sketch below to identify the various controls.

aga4

If your Aga is only to be left for a few days, why turn it off? It doesn’t hurt to leave it on a lower thermostat position.

For longer periods the pilot only may be left on as follows:

Either switch off the electricity supply to the Aga (where provided) or turn knob ‘B’ to position ’1′

To turn it off completely:

1. Turn the control knob ‘A’ clockwise to the ‘OFF’ position.

2. Turn the main gas cock ’1′ through 90 degrees, until the line marked on the cock, is across the gas pipe.

3. If your cooker has an electricity supply, this should be turned off as well.

Staunch and Flow are Central London’s independent service engineers. We service and maintain any and all Aga gas cookers in the capital.

AGA, the manufacturer of Aga cookers, advises all their cooker owners to have their cooker serviced every year so that faults don’t develop. Our staff are trained to maintain Aga cookers and have undertaken all the required Aga service engineers courses and also hold the appropriate Corgi Range Cooker certification to allow them to work effectively on the cookers.

We charge £160 + VAT for an Aga service engineers visit and examination of the cooker in question. We conduct a full Aga service, which includes taking off the hot plate, changing the thermocouple and checking that all the flues are clean. The price of parts – including the thermocouple – is not included in the service price.

If the cooker is faulty and requires fixing, then we charge at our hourly rate of £80+ VAT. Our friendly service engineers will explain this all to you when they come to visit.

Please note, in order for our Aga services engineers to work on your Aga cooker you must have turned it off 24 hours in advance of the engineer’s arrival to ensure that it has cooled down enough to work on.

If your cooker requires Aga Rayburn servicing then call us today on 0208 964 6714 to arrange an appointment.

We also provide Rayburn service engineers across London.

Converted Aga’s are old solid fuel heat storage units that have been converted to use gas. Most converted Aga’s use a Junkers valve or a more modern 630 eurosit valve. The main different between a normal aga and a converted aga is that the gas valve is on the outside of the aga on the left or the right side. This means that the thermocouple used is not going to be a conventional aga thermocouple. It might be a very long universal thermocouple or it might be a thermocouple with an extension on it. Either way the parts are not standard.

Staunch and Flow try to carry as many parts as possible however parts for the converted Aga’s are very hard to get and can take some time to source. Our team has extensive knowledge of these aga’s and will try to help in every way we can. We do not charge any more to service a recon Aga.

Is your Aga looking a bit tired, or have you recently bought or inherited a second-hand Aga in need of re-enamelling? Staunch and Flow can re-enamel your Aga whether you are based in London or elsewhere in the UK.

Aga re-enamelling can take a reliable but shabby-looking Aga and give it back that good as new sparkle. It involves stripping down the affected areas and applying a new coat of enamel.

As Agas are made up of several different parts, the advantage is that you can pick the elements you would like to be re-enamelled in order to manage costs or if only certain parts are damaged – for instance, oven doors or the oven plate. We can however do a complete re-enamel job if required, or at the other end of the scale simply repair chips in the enamel.

Staunch and Flow carry out re-enamelling on Agas of all colours, although prices may vary if your oven is not one of the 21 standard Aga colours. For more information on our Aga re-enamelling service, call us now on 0208 964 6714, request a callback using the form on the right, or fill in our contact form.

Staunch and Flow provides professional Aga and Rayburn servicing to clientele all over London. We maintain and fix all types of Aga and Rayburn gas cookers.

Your Aga/Rayburn cooker should be serviced at least every year according to the manufacturers. Our staff have completed the relevant Aga and Rayburn training courses and are fully capable of servicing any type of Aga or Rayburn cooker.

We charge £160 + VAT for a fully approved Aga/Rayburn service call out. The Aga Rayburn servicing includes taking off the hot plate, changing the Thermocouple and checking that the flues are clean. Parts are not included in the price.

If there is something wrong with your Aga or Rayburn cooker and we need to fix it, then we charge at our hourly rate of £80 + VAT.

It is important to note that for us to be able to perform Aga services on a cooker, you must have turned off your cooker 24 hours in advance of our arrival to ensure that it has cooled down properly. This is also the case if you require Rayburn services for your cooker.

If you are interested in our Aga Rayburn servicing and need Aga service engineers, please call us today on 0208 964 6714 to arrange an appointment.

SPEAK TO A PLUMBER NOW

ACCREDITATIONS